Pool Proper Maintenance in a Nutshell

It is easy to have a daydream of hosting parties, adopting fitness routines which include laps after your work and spending long sunny afternoons lounging poolside while developing your perfect tan lines if you have a swimming pool in your backyard will always be amazingly glamorous. However, one very important element of owning a pool is usually forgotten – it’s timely maintenance.  

As a matter of fact, without any proper maintenance routine, there’s a big possibility that your pool can succumb to a wide variety of unsightly and stressful conditions including broken filters, green water, as well as algae and mold buildup, just to name some. In addition to that, no one really likes to lay by a swimming pool that is not good to look at. In this article, you will be able to learn some of the most important maintenance tips, which you can try right now.  

Whether you have just opened your swimming pool for the first time or you have been a proud owner of it for many years, then you should consider checking these tips out in order to get your summer off to the right start. But, if there are any damage in your pool or needs thorough right away, then consider hiring a professional pool cleaning service provider. 

Skimming the debris and leaves off of the water’s surface is definitely no-brainer, however, it bears repeating. And, for a pristine swimming pool, skimming must be done in a daily manner. But, if money is not an issue to you, you can also buy a robot vacuum, which will help clean the bottom part of your swimming pool.  Aside from skimming, you also need to scrub thoroughly the sides of your swimming pool in order to prevent the build-up of algae.  

Luckily, that does not need to be done at all times. You can at least get away with your scrubbing task once every two weeks. Simply look for growths and then go at them using a scrub brush in order to keep your pool’s siding clean and fresh. On the other hand, for those stubborn spots that will not go away with elbow grease, try repurposing an old sock. Simply fill your old sock with chlorine and then let the sock sit on top of the stubborn sports for several hours prior to scrubbing once more.  

As a matter of fact, the chlorine will work well by eating away all the algae and mold and you will finally know how and when to use those socks of yours that don’t have pairs – just a win-win situation. Just like how your kidneys are working constantly in order to remove any impurities from your own body, the filter of your swimming pool is also responsible for removing any impurities from the water – just think of leaves, dirt, and even small toys.  

Oftentimes, your swimming pool can be thoroughly cleaned by turning off its filter, removing the cap of the filter that is located on the deck of your pool, lifting out your filter basket, and then removing all the debris prior to replacing the whole thing. For more tips on pool maintenance Santa Rosa, make sure to reach out to the professionals. 

 

 

How Solar Panel Work

It was the French scientist Edmond Becquerel who discovered in 1839 that there are certain materials that would give off sparks of electricity when hit with sunlight. This property is called photoelectric effect. In 1800s, the first photovoltaic or PV cells were created. In 1950s, researchers came back to the said technology and used silicon; they produced PV cells that convert 4% of sunlight energy into electricity. That was the beginning of the history of solar panels which many enjoy right now. If you’re wondering how solar panels around the world and Utah Solar work, the rest if written below.

Components of PV Cells

The components of PV cells are 2 layers of semiconductor material composed of silicon. When you think of it, silicon is not a good electricity conductor. But if you add impurities, the process is called doping, electric current is created.

The top layer of the PV cell is doped with phosphorus that bonds with silicon to create a negative charge and the bottom layer is doped with boron that bonds with silicon to create positive charge. The surface between the charges is called P-N junction.

Types of Solar Cells

The following are the basic types of solar cells:

  • Single-Crystal Cells

These are made in cylinders and sliced into thin wafers. It can produce the highest-efficiency cells that convert the most sunlight into electricity.

  • Polycrystalline Cells

It is made of molten silicon then sliced into squares. The efficiency is low because its production costs are low too.

Thin Film Cells

It involves depositing or spraying materials onto metal or glass surfaces in thin films. It makes the whole module at one time. The efficiency is lower but the cost is also lower.

How Solar Power is Integrated Into the Electricity Grid

Integrating the solar power into the electricity grid provides many advantages. If you’re powering your home, a building or any utilities, you can choose from the different technologies of solar power it’s either small-scale distributed or large-scale PV systems.

The rooftop solar panels and its electricity supplies on-site needs then the electricity grid supplies the additional electricity if the home or business needs more. The greatest benefit one can get from a rooftop solar is that it produces the electricity when the power is most valuable. For example, most of electricity demand peaks on sunny days where afternoon is hot. The system helps the utilities to meet the peak demand without using the power plants that are polluter and expensive.

The large-scale solar systems on the other hand feed the high-voltage electricity grid directly. It has similarities with power plants. This system operates at highest capacity when the demand is great too. It is also more resilient to extreme weather. The traditional power plants are prone to failures when one of its systems is damaged. The solar system will continue working even if one of its sections is damaged.

If you desire a high level usage of PV, you can but it’s challenging. But technology upgrade is available in the market so increase level of solar penetration is possible.